Eamonn Posted May 24, 2016 Share Posted May 24, 2016 I have a hole in my oil sump which I have patched up with a screw and washer in the hole with 'JB Weld' putty over it. The front of the sump is also quite pitted. The patch worked for a short time but is seeping out now. I can't find a new one anywhere and places I have tried are not keen on welding a patch over it to repair it. Unless I can find a replacement the future does not look good which would be terrible! So - does anyone out there have an oil sump I could purchase - or any ideas?? Hope some one can help. Thanks. Quote Link to comment Share on other sites More sharing options...
Dannyb Posted May 24, 2016 Share Posted May 24, 2016 What engine ? Quote Link to comment Share on other sites More sharing options...
Eamonn Posted May 24, 2016 Author Share Posted May 24, 2016 Hi - 1983 - 1335 cc - probably same as a Honda Ballade / Civic from same era - think engine code is EN4? Quote Link to comment Share on other sites More sharing options...
Jonny-Jimbo Posted May 25, 2016 Share Posted May 25, 2016 If you struggle to find a sump I can do the welding for you, PM me. I have done other welding for people on here (Clifty Hanger and Richard B's daughter) Quote Link to comment Share on other sites More sharing options...
Eamonn Posted May 25, 2016 Author Share Posted May 25, 2016 Thanks for that - where are you based? I will keep this in mind but hopefully someone has a sump out there or knows where I can find one. Quote Link to comment Share on other sites More sharing options...
Jonny-Jimbo Posted May 25, 2016 Share Posted May 25, 2016 Coventry area - but if it's cleaned up it can be posted easily enough as it won't weigh much at all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.