mowerman Posted May 29, 2008 Share Posted May 29, 2008 I`m just converting my Vit to rotoflex-less at the rear (where else :o) I`ve heard that once you`ve removed the roto shafts you can replace the rear lever arms with conventional shockers, is this correct? thanks, Steve. Link to comment Share on other sites More sharing options...
Richard B Posted May 29, 2008 Share Posted May 29, 2008 I think so. Heralds have conventional dampers.Are you going CV? Link to comment Share on other sites More sharing options...
mowerman Posted May 29, 2008 Author Share Posted May 29, 2008 Hi Richard,Am going CV with the Canley`s conversion :) Looked into doing it myself but the cost didn`t justify it. Steve. Link to comment Share on other sites More sharing options...
Pete Lewis Posted May 29, 2008 Share Posted May 29, 2008 http://www.tssc.org.uk/index.php?option=com_virtuemart&page=shop.browse&category_id=62&Itemid=59does this do what you want Peter Link to comment Share on other sites More sharing options...
roger.england Posted May 29, 2008 Share Posted May 29, 2008 I've got a pair of Canley's rear wishbone mounting brackets (unused) if they're of use to anyone.Roger Link to comment Share on other sites More sharing options...
CharlieB Posted May 29, 2008 Share Posted May 29, 2008 peterhlewis wrote:http://www.tssc.org.uk/index.php?option=com_virtuemart&page=shop.browse&category_id=62&Itemid=59does this do what you want PeterDon't think you need that with CV driveshaft? Link to comment Share on other sites More sharing options...
Nick Jones Posted May 29, 2008 Share Posted May 29, 2008 Should be able to use the standard non roto shocks on the standard non-roto chassis mounts with CV driveshafts. I should say that I've not actually done this though as I alrady had chassis extensions fitted from roto days.....Nick Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.