bazza Posted June 20, 2010 Share Posted June 20, 2010 Does any one know if it is ok to enlarge the holes on the chassis to fit the wider u-bolts for the thicker ARB I was going to drill out both holes evenly until the u bolts fit but if anyone has a better idea could you let me knowcheers! Link to comment Share on other sites More sharing options...
Velocita Rosso Posted June 20, 2010 Share Posted June 20, 2010 Which car? Which anti roll bar, etc? Link to comment Share on other sites More sharing options...
bazza Posted June 21, 2010 Author Share Posted June 21, 2010 oops....Obviously not a psychic network then!! its a herald 1360 and I've got an ARB from a 1500 spitfire Link to comment Share on other sites More sharing options...
GreenV8Machine Posted June 21, 2010 Share Posted June 21, 2010 just lengthen the holes? I would use a washer to spread the load. Link to comment Share on other sites More sharing options...
sparky_spit Posted June 21, 2010 Share Posted June 21, 2010 On mine, I drilled the holes out slightly and then slotted them, using a now-knackered drill bit and a round file. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.