Tahiti6 Posted January 27, 2013 Share Posted January 27, 2013 I notice when re-assebling the verticle link into a new trunnion there was some sideways movement... not sloppy just you can move the link a couple of mm's left right/back and forth. There is no verticle movement when assembled, none at all its firm/solid as you would expect and good for the MOT. I checked the thread in the verticle link and this seems fine, the thread is flat top and no signs of wear.is this the norm? Quote Link to comment Share on other sites More sharing options...
TR6_Java Posted February 3, 2013 Share Posted February 3, 2013 I assume you've got the ones with the rough surface finish on the outside. They are way to large in the guiding bore (approx. 0,4mm in diameter). Thats why they are so loose.Check my comparison.http://www.tr-freun.de/modules.php?name=tr-galerie&op=showpicbig&picid=14893 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.