marshman777 Posted November 9, 2010 Share Posted November 9, 2010 What type of boss do i need to fit a wheel of a mini.and what size bolt attaches the wheel at the minute.Thanks Link to comment Share on other sites More sharing options...
ResinRocket Posted November 14, 2010 Share Posted November 14, 2010 If I remember correctly the nut is 15/16in. What sort of Mini steering wheel is it? If it's a standard one I wouldn't think it would fit unless the splined shafts are the same. If it's an aftermarket one you can buy bosses to fit Mountney / Moto Lita / Astrali etc. steering wheels. Link to comment Share on other sites More sharing options...
willows40 Posted November 14, 2010 Share Posted November 14, 2010 can`t remember which car i took it off but would be a triumph, Had a mountney wheel/boss laying around and it fitted a 95 mini only thing it needed was a couple of tubes for the indicator cancels.cheers andy Link to comment Share on other sites More sharing options...
ResinRocket Posted November 14, 2010 Share Posted November 14, 2010 The steering wheel nut is 1 1/16" with 9/16UNF thread, not 15/16 as I put in my last post! Link to comment Share on other sites More sharing options...
Marshman 1360 Posted November 14, 2010 Share Posted November 14, 2010 Thanks Guys now found a wheel that has a boss for a herald so should be ok and got a spanner to fitThanks Andy Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.