npanne Posted October 11, 2010 Share Posted October 11, 2010 Can anyone advise what's involved in moving the steering column (Mk IV Spit) away from the rack by enough to allow it to go through the hole in the suspension turret? Old turret was removed with assistance from angle grinder (tool #001 these days), but that doesn't help with reassembly!CheersNeil Link to comment Share on other sites More sharing options...
npanne Posted October 11, 2010 Author Share Posted October 11, 2010 Forgot to mention, I have already undone the coupling between column and rack. Link to comment Share on other sites More sharing options...
CharlieB Posted October 11, 2010 Share Posted October 11, 2010 If you undo & remove the clamp at the bottom of the outer column, the lower half of the inner column will push up inside the upper half. It may be enough to fit the turret. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.