sale, MK2 trailing arms, crossmember etc

[grunty]

A few bits for sale if I may..
I recently bought a complete rear end from a MK2 as I needed a diff. I have decided that I wish to retain the narrow track on my MK1 so I have a bunch of unneeded parts.
I have stripped it all down and it has been grit blasted and powder coated,
The steel parts, cross members, brake back plates trailing arm brackets etc have all be powdered in satin black, the trailing arms were blasted in non contaminated grit then etch primed and silvered to give an original looking finish without leaving bare ally to go off :)
I have left the original bushes in but I can remove if required.
I will take some pics later but included is...
2, trailing arms,
2, cross members,
2, ant vibe straps,
4, mounting brackets,
1, spacer tube for exhaust bracket,
2, brake back plates + springs and handbrake actuators (if that's what they are called)

I will include the wheel cylinders and brake shoes but they are used, look ok but ?

Unsure about drums, need to know if they fit my MK1 first :)

[DJB_Harvey]

That's a good price ! & yes Brake drums fit Mk1.

[grunty]

Cheers :)
Right, I will keep the drums as spares everything else is for sale/swap

[mikeyb]

if they don't go as a job lot, I need a passenger side backplate  ;-)

[thescrapman]

MikeyB wrote:

if they don't go as a job lot, I need a passenger side backplate  ;-)

Don't be such a tight-wad, get both backplates! You need to rebuild both sides.

I have a rusty one if you can't bring yourself to prize your wallet open.

:-)