dazzer Posted January 18, 2010 Share Posted January 18, 2010 Hi guysTrailing arm shims illustrated in the parts lists and workshop manual are shown inserted from the outside in... However, it's much easier and quicker to pop them in from the inside edge.Is there a technical reason for them being shown in the 'outside in' orientation...?CheersDarren Link to comment Share on other sites More sharing options...
piman Posted January 19, 2010 Share Posted January 19, 2010 Hello Darren, a shim is a shim, and as long as it is fully in place then that's all that matters.Alec Link to comment Share on other sites More sharing options...
dazzer Posted January 19, 2010 Author Share Posted January 19, 2010 Thanks AlecI presumed it didn't matter but there's always that niggling doubt.CheersDarren Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.