flimsyboat Posted June 20, 2010 Share Posted June 20, 2010 hello everyone, ive just purchased a mk1 vitesse convertable and was just wondering if there is any way i can adjust the steering wheel to go up a bit as i am fairly tall and keep getting my knees stuckany help much appreciated Link to comment Share on other sites More sharing options...
JohnD Posted June 20, 2010 Share Posted June 20, 2010 First 'flimsyboat', what do we call you? That's no name for a manly Vitesse owner!While you can adjust the length of the steering colume a bit, so that it's nearer your chest and further from your knees, but it's fixed to the bulkhead and you can't adjust the angle, or height.Consider a smaller wheel?Perhaps not one as small as this (10")!John Link to comment Share on other sites More sharing options...
Pete Lewis Posted June 20, 2010 Share Posted June 20, 2010 below the tube end there is a slide joint locked in place by a locknut and short socket cap screw, this is to allow the column to collapse in and acident,if you slacken the clamp and the saddle thatbholds the tube you can as \john says pull the whole assy up towards your chestretighten the saddle clamp(s) on the fascia and nip firmly( not over tight ) the socket screw , lock the nut. keep a small gap between the back of the wheel and the top of the cowling, and i would take out the horn brush first to avoid it getting snapped while you pull and push the 2 parts Pete Link to comment Share on other sites More sharing options...
Casper Posted June 20, 2010 Share Posted June 20, 2010 Buy a workshop manual, or at least a Haynes manual. C,. Link to comment Share on other sites More sharing options...
994FRX Posted June 22, 2010 Share Posted June 22, 2010 Its all part of the fun of owning an old car, you will get used to it. Link to comment Share on other sites More sharing options...
flimsyboat Posted June 23, 2010 Author Share Posted June 23, 2010 thank you all for your help, much appreciated Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.