That Man Posted May 25, 2012 Share Posted May 25, 2012 Hi all, i'm looking to polybush the rear of the 1300fwd but the only bush/mount specifically listed is the #142236 center subframe mount which is used on Mk1 big saloons i believe. Other bushes i need are the ones for the subframe outer, these look similar to the inner TCA bush on the front of the big saloon and the bolt size is almost identical, so if some kind gentlemen could tell me the internal diameter and length of the housing and the length of said bush I'll know if it'll fit. Lastly the bushes for the trailing arms uses the same size bolt as the TR2-6 front lower wishbone on the inboard end, so again using this as my lead i need to know the housing diameter,length and bush length.I don't expect people to go crawling under their cars with a tape measure (digital calipers would be better ;) ) as i'm in no rush. but if you have some bits you could measure up in the shed or garage it would be most helpful :)Gordon Link to comment Share on other sites More sharing options...
thescrapman Posted May 25, 2012 Share Posted May 25, 2012 Gordon, the centre bush is definatley the same as a type 3 subframe bush for a Mk1 2000. as we used 1300 ones on a 2000 when desperate before the RBRR.I have a TCA with no bush fitted, is that any assistance if I measure it?CheersColin Link to comment Share on other sites More sharing options...
That Man Posted May 25, 2012 Author Share Posted May 25, 2012 Hi Colin, yes please, if you could measure the TCA for me Correction, it's the not TR2-6 just TR6 bush, #141481. Do the TR boys venture this far down the page ? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.