MarkB Posted July 28, 2011 Share Posted July 28, 2011 HiCan anyone tell me what way round this bonnet pivot bracket goes. There are two per side and go either side of the bonnet pivot bracket on the chassis. I can't remember if the elongated hole fits to the bonnet tube or the pivot bracket on the chassis to allow up and down adjustment. I have tried it both ways and i am starting to think that the elongated hole goes onto the chassis and the round hole fixes to the bonnet tube. ThanksMark Link to comment Share on other sites More sharing options...
Zendervision Posted July 29, 2011 Share Posted July 29, 2011 The elongated bit goes onto the bonnet tube. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.