Davemate Posted August 23, 2011 Share Posted August 23, 2011 Just a quickie, is the 1200 herald clutch slave cylinder the same as the 1500 spit one Link to comment Share on other sites More sharing options...
Clive Posted August 23, 2011 Share Posted August 23, 2011 Maybe!If the herald has a diaphragm clutch then yes (cylinder has a slot cut for the pinch bolt.If coil clutch then no, slot machined all the way round the cylinder. Link to comment Share on other sites More sharing options...
Davemate Posted August 23, 2011 Author Share Posted August 23, 2011 I need to change all the seals on the clutch hydraulics(wifes car),but I have a new unuesed slave which I got when I bought my 1500 engine.Can I used it if it's not the same as the one fitted to the car,or do I have to get a seal kit For the one that's fitted Link to comment Share on other sites More sharing options...
heraldcoupe Posted August 23, 2011 Share Posted August 23, 2011 Don't mix & match, it invariably leads to problems,Cheers,Bill. Link to comment Share on other sites More sharing options...
Davemate Posted August 23, 2011 Author Share Posted August 23, 2011 Are the seal kits the same ? Link to comment Share on other sites More sharing options...
heraldcoupe Posted August 23, 2011 Share Posted August 23, 2011 No, the diaphragm and coil spring clutch cylinders have different bores. Cheers,Bill. Link to comment Share on other sites More sharing options...
Davemate Posted August 23, 2011 Author Share Posted August 23, 2011 I have checked the spare cylinder and it has a groove down one side, so fingers crossed it's the same as what's in the car I have a refurb kit for the master so weather pending I'll get it done tomorrow if the slave is the same,if not I'll order a kit Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.