animator Posted July 30, 2009 Share Posted July 30, 2009 Hi everyone, The previous owner of my 13/60 convertible had fitted new brake pipes ( not the rubber hose bits - the metal pipes ) and they look like a load of spaghetti running all over the place! So I'm trying to re route them in the original fashion. But I can't seem to find any good pictures, my Haynes manual shows a simple drawing that gives me a rough idea, but doesn't show where and how they are clipped along the route. Can anyone give me an idea, a photo/drawing perhaps - Many thanks. Link to comment Share on other sites More sharing options...
PDV Posted July 30, 2009 Share Posted July 30, 2009 Animator, I am in a similar position so not able to help at present. I am planning to go to Stafford and this is one of the things I will be taking photographs of.All being well there will be cars suitable for this.I will of course share them with you if all works out ok. Link to comment Share on other sites More sharing options...
heraldcoupe Posted July 30, 2009 Share Posted July 30, 2009 Some of the branded kits are supplied with every pipe about 6" longer than it should be. If you have one of these kits then there's little chance of matching the original pipe runs,Cheers,Bill. Link to comment Share on other sites More sharing options...
animator Posted July 30, 2009 Author Share Posted July 30, 2009 OK thats great, I'll look forward to your post. Link to comment Share on other sites More sharing options...
animator Posted July 30, 2009 Author Share Posted July 30, 2009 Thats OK Rarebits I have the tool to remake the pipe ends. Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.