stillnotfinnished Posted July 22, 2008 Share Posted July 22, 2008 hi i need to know the correct layout of the brake and fuel pipes at the back of my herald anybody got any pictures? any help greatly recieved.. and the best way of fixing them on the things i got with the automec kit keep snapping off :'(thanks ed Link to comment Share on other sites More sharing options...
heraldcoupe Posted July 22, 2008 Share Posted July 22, 2008 For a proper layout you will most likely need to cut and re-make the Automec pipes to the correct lengths. Pipes supplied by Automec are usually 4-6" longer than the originals, making them impossible to route correctly.Let me know which type of Herald you have and I will post a list of the correct pipe lengths. Cheers,Bill. Link to comment Share on other sites More sharing options...
stillnotfinnished Posted July 22, 2008 Author Share Posted July 22, 2008 hi its a 1200 conv but with a swing spring. also do you know if the fuel pipe goes under the drive shaft or over it,if it does go under what is it fixed too?thanks for your help ed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.