Callan Hyde Posted August 7, 2021 Share Posted August 7, 2021 (edited) Some progess has been made on my estate which i purchased last month. After a bit of cleaning and general assessment work, i pulled the seized engine and auto box out last weekend and dragged it into the "workshop" yesteday. Today has been spent attacking the front end with a grinder to remove the totally unsalvageable lamp panel, flitch panel and rad support panel. Brushed the grinder over a lot of the rest and with the assistance of a screwdriver poked several more holes in areas around the flitch panel and the top of the OS chassis leg. Removed the screen and thankfully the damage to the surround is minimal, it has however leaked in both corners and caused quite a bit of rot on the inside of the bulkhead... Ive also aqquired a 2.5 PI engine which i will be building for it also, just need to find a manual gearbox now in good time. Ive sourced the front end off another car which will be replacing what is missing on mine, with the front end and two floorpans secured, that just leaves the bulkhead and ends of the sills to deal with! Edited August 7, 2021 by Callan Hyde 3 Quote Link to comment Share on other sites More sharing options...
Rubce Posted August 7, 2021 Share Posted August 7, 2021 2 hours ago, Callan Hyde said: Some progess has been made on my estate which i purchased last month. After a bit of cleaning and general assessment work, i pulled the seized engine and auto box out last weekend and dragged it into the "workshop" yesteday. Today has been spent attacking the front end with a grinder to remove the totally unsalvageable lamp panel, flitch panel and rad support panel. Brushed the grinder over a lot of the rest and with the assistance of a screwdriver poked several more holes in areas around the flitch panel and the top of the OS chassis leg. Removed the screen and thankfully the damage to the surround is minimal, it has however leaked in both corners and caused quite a bit of rot on the inside of the bulkhead... Ive also aqquired a 2.5 PI engine which i will be building for it also, just need to find a manual gearbox now in good time. Ive sourced the front end off another car which will be replacing what is missing on mine, with the front end and two floorpans secured, that just leaves the bulkhead and ends of the sills to deal with! Good work. 1 Quote Link to comment Share on other sites More sharing options...
yorkshire_spam Posted August 8, 2021 Share Posted August 8, 2021 Keep up the good work! 1 Quote Link to comment Share on other sites More sharing options...
MarkB Posted August 8, 2021 Share Posted August 8, 2021 Lot of hard work, but it will be well worth it when it's done. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.