Talkwrench Posted June 17, 2014 Share Posted June 17, 2014 Guys I need to buy some more wheel nuts for my Herald, as they are flogged out.. They are a mag wheel type like a cylinder , has no taper on it , just goes through the wheel , has an outer washer . What is the thread pitch Im looking for ? I think there was a faint 3/8 stamped on one. Are these hard to come by? Thanks.. Quote Link to comment Share on other sites More sharing options...
Stu 1986 Posted June 17, 2014 Share Posted June 17, 2014 I just bought a set for mine, they are plentiful. Here is the size I bought: 3/8" thread 5/8" sleeve nut. You'll need washers too I imagine. Quote Link to comment Share on other sites More sharing options...
junkuser Posted June 17, 2014 Share Posted June 17, 2014 UNF Quote Link to comment Share on other sites More sharing options...
MrSpeedy Posted June 17, 2014 Share Posted June 17, 2014 3/8" UNF.Mister Tee is a name i keep hearing, off of the interwebs.Also Midland Wheel Supplys keep sleeve nuts (their proper name) for the Revolution wheels Quote Link to comment Share on other sites More sharing options...
Talkwrench Posted June 18, 2014 Author Share Posted June 18, 2014 Thank you gents ! I will start looking.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.