oldbanger Posted May 2, 2011 Share Posted May 2, 2011 I've to replace two rear wheel studs on my 6 MK3 Rotoflex 1972 - presently pretty normal set up - 155R13 wheels - doesnt look to be anything messed with.But I need to buy the parts first. I've hunted Rimmer Bros, and the Moss catolouge (Spitty) - but can't find them.Does anyone know what size , description I need.CheersJon Link to comment Share on other sites More sharing options...
Richard B Posted May 2, 2011 Share Posted May 2, 2011 Phone Canleys they sell them, or consider upgrading to big Saloon 7/16" UNF studs and wheel nuts. Especially if you have two broken ones :-/ Link to comment Share on other sites More sharing options...
Nick Jones Posted May 2, 2011 Share Posted May 2, 2011 Or go M12 with Landrover Freelander ones. Not quite so easy to fit though as you need to drill a hole in the backplate to feed them through - saloon ones might be the same?Nick Link to comment Share on other sites More sharing options...
oldbanger Posted May 2, 2011 Author Share Posted May 2, 2011 Richard, Nick,Cheers. Just got the Canleys website working on my Comp - it needed IE - I was using Firefox.Fantastic - will ring them tomorrow .CheersJon Link to comment Share on other sites More sharing options...
Richard B Posted May 3, 2011 Share Posted May 3, 2011 Nick_Jones wrote:Or go M12 with Landrover Freelander ones. Not quite so easy to fit though as you need to drill a hole in the backplate to feed them through - saloon ones might be the same?Saloon studs fitted fine to Rotoflex hubs without stripping down. I had to grind a flat in the side of the studs that I fitted to the front hubs (and I took the discs off to check). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.