davidbradley Posted June 18, 2009 Share Posted June 18, 2009 HiWould anyone know if the above would fit on a Vitesse?Thanks Link to comment Share on other sites More sharing options...
Clive Posted June 18, 2009 Share Posted June 18, 2009 Should do. Certainly correct bolt spacing. However caution may be needed as the offset "may" be wrong and cause rubbing on the arches. Link to comment Share on other sites More sharing options...
Nick Jones Posted June 18, 2009 Share Posted June 18, 2009 Very Probably. You want an ET of something like 13. With ET 13 you can (just) get 6" wheels and 175/70 tyres in standard arches - works for me :)Nick Link to comment Share on other sites More sharing options...
CharlieB Posted June 19, 2009 Share Posted June 19, 2009 cliftyhanger wrote:However caution may be needed as the offset "may" be wrong and cause rubbing on the arches.Or the front wishbones on full lock, there was a thread recently about Minator 5.5" alloys (ET 25) needing spacers to fit. Link to comment Share on other sites More sharing options...
davidbradley Posted June 19, 2009 Author Share Posted June 19, 2009 Sorry chaps, my ignorance, but not familiar with the term ETThanks Link to comment Share on other sites More sharing options...
Nick Jones Posted June 19, 2009 Share Posted June 19, 2009 This is quite helpfulhttp://www.raceandroad.com/acatalog/Offset.htmlNick Link to comment Share on other sites More sharing options...
davidbradley Posted June 20, 2009 Author Share Posted June 20, 2009 Thanks a lot Nick, and your wheels look great by the way.The wheels appear to be ET8, As they are 12mm or so narrower than 6", I guess that puts them at around the same outer point as the "on ET13, with an extra 12mm of spacing on the inner edge.Might be worth a bidOnce again thanks Link to comment Share on other sites More sharing options...
davidbradley Posted June 20, 2009 Author Share Posted June 20, 2009 Thanks a lot Nick, and your wheels look great by the way.The wheels appear to be ET8, As they are 12mm or so narrower than 6", I guess that puts them at around the same outer point as the "on ET13, with an extra 12mm of spacing on the inner edge.Or is that vice versa,......either way, one edge or the other is in the same place as yoursMight be worth a bidOnce again thanks Link to comment Share on other sites More sharing options...
.thumb.jpeg.b15b81ef10abeea1c3039ae03c4a9f3a.jpeg)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.