ben20vt Posted August 11, 2010 Share Posted August 11, 2010 Quick question,Are/will early sprint front hubs fit a gt6 upright/stub axle.from looking at them they use the same size bearings, rimmer no' ukc868 as i thought they might be a cheaper alternative to alloy hubs.Ben Link to comment Share on other sites More sharing options...
Nick Jones Posted August 11, 2010 Share Posted August 11, 2010 Don't know the answer - quite possibly. But what are you trying to achieve - if they do fit it's because they are basically the same part and will therefore be just as heavy as the GT6 item?Nick Link to comment Share on other sites More sharing options...
ben20vt Posted August 11, 2010 Author Share Posted August 11, 2010 I just need some hubs to fit my discs, as the ones i have now are buckeled on the back.As with herald/spitfire/gt6 the disc's bolt on through the disc to the hub, on some dolomites i see this is the other way around,would this be a isusse using spitfire discs,Ben Link to comment Share on other sites More sharing options...
trackerjack Posted August 11, 2010 Share Posted August 11, 2010 All Dolly hubs have clearance holes in them and the discs are threaded 3/8 UNC. Link to comment Share on other sites More sharing options...
ben20vt Posted August 12, 2010 Author Share Posted August 12, 2010 Thanks everyone,ive decided to splash out on alloy hubs 8)Ben Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.